Décodage des protocoles Oregon Scientific sur Arduino (1/3)

class OregonDecoderV2 : public DecodeOOK {
  public:   

    OregonDecoderV2() {}

    // add one bit to the packet data buffer
    virtual void gotBit (char value) {
        if(!(total_bits & 0x01))
        {
            data[pos] = (data[pos] >> 1) | (value ? 0x80 : 00);
        }
        total_bits++;
        pos = total_bits >> 4;
        if (pos >= sizeof data) {
            Serial.println("sizeof data");
            resetDecoder();
            return;
        }
        state = OK;
    }

    virtual char decode (word width) {
       if (200 <= width && width < 1200) {
            //Serial.println(width);
            byte w = width >= 700;

            switch (state) {
                case UNKNOWN:
                    if (w != 0) {
                        // Long pulse
                        ++flip;
                    } else if (w == 0 && 24 <= flip) {
                        // Short pulse, start bit
                        flip = 0;
                        state = T0;
                    } else {
                        // Reset decoder
                        return -1;
                    }
                    break;
                case OK:
                    if (w == 0) {
                        // Short pulse
                        state = T0;
                    } else {
                        // Long pulse
                        manchester(1);
                    }
                    break;
                case T0:
                    if (w == 0) {
                      // Second short pulse
                        manchester(0);
                    } else {
                        // Reset decoder
                        return -1;
                    }
                    break;
              }
        } else if (width >= 2500  && pos >= 8) {
            return 1;
        } else {
            return -1;
        }
        return 0;
    }
};

// Oregon V2 decoder modfied - Olivier Lebrun
// Oregon V2 decoder added - Dominique Pierre
// New code to decode OOK signals from weather sensors, etc.
// 2010-04-11 <jcw@equi4.com> http://opensource.org/licenses/mit-license.php
// $Id: ookDecoder.pde 5331 2010-04-17 10:45:17Z jcw $

class DecodeOOK {
protected:
    byte total_bits, bits, flip, state, pos, data[25];

    virtual char decode (word width) =0;

public:

    enum { UNKNOWN, T0, T1, T2, T3, OK, DONE };

    DecodeOOK () { resetDecoder(); }

    bool nextPulse (word width) {
        if (state != DONE)

            switch (decode(width)) {
                case -1: resetDecoder(); break;
                case 1:  done(); break;
            }
        return isDone();
    }

    bool isDone () const { return state == DONE; }

    const byte* getData (byte& count) const {
        count = pos;
        return data; 
    }

    void resetDecoder () {
        total_bits = bits = pos = flip = 0;
        state = UNKNOWN;
    }

    // add one bit to the packet data buffer

    virtual void gotBit (char value) {
        total_bits++;
        byte *ptr = data + pos;
        *ptr = (*ptr >> 1) | (value << 7);

        if (++bits >= 8) {
            bits = 0;
            if (++pos >= sizeof data) {
                resetDecoder();
                return;
            }
        }
        state = OK;
    }

    // store a bit using Manchester encoding
    void manchester (char value) {
        flip ^= value; // manchester code, long pulse flips the bit
        gotBit(flip);
    }

    // move bits to the front so that all the bits are aligned to the end
    void alignTail (byte max =0) {
        // align bits
        if (bits != 0) {
            data[pos] >>= 8 - bits;
            for (byte i = 0; i < pos; ++i)
                data[i] = (data[i] >> bits) | (data[i+1] << (8 - bits));
            bits = 0;
        }
        // optionally shift bytes down if there are too many of 'em
        if (max > 0 && pos > max) {
            byte n = pos - max;
            pos = max;
            for (byte i = 0; i < pos; ++i)
                data[i] = data[i+n];
        }
    }

    void reverseBits () {
        for (byte i = 0; i < pos; ++i) {
            byte b = data[i];
            for (byte j = 0; j < 8; ++j) {
                data[i] = (data[i] << 1) | (b & 1);
                b >>= 1;
            }
        }
    }

    void reverseNibbles () {
        for (byte i = 0; i < pos; ++i)
            data[i] = (data[i] << 4) | (data[i] >> 4);
    }

    void done () {
        while (bits)
            gotBit(0); // padding
        state = DONE;
    }
};

class OregonDecoderV2 : public DecodeOOK {
  public:   

    OregonDecoderV2() {}

    // add one bit to the packet data buffer
    virtual void gotBit (char value) {
        if(!(total_bits & 0x01))
        {
            data[pos] = (data[pos] >> 1) | (value ? 0x80 : 00);
        }
        total_bits++;
        pos = total_bits >> 4;
        if (pos >= sizeof data) {
            Serial.println("sizeof data");
            resetDecoder();
            return;
        }
        state = OK;
    }

    virtual char decode (word width) {
       if (200 <= width && width < 1200) {
            //Serial.println(width);
            byte w = width >= 700;

            switch (state) {
                case UNKNOWN:
                    if (w != 0) {
                        // Long pulse
                        ++flip;
                    } else if (w == 0 && 24 <= flip) {
                        // Short pulse, start bit
                        flip = 0;
                        state = T0;
                    } else {
                        // Reset decoder
                        return -1;
                    }
                    break;
                case OK:
                    if (w == 0) {
                        // Short pulse
                        state = T0;
                    } else {
                        // Long pulse
                        manchester(1);
                    }
                    break;
                case T0:
                    if (w == 0) {
                      // Second short pulse
                        manchester(0);
                    } else {
                        // Reset decoder
                        return -1;
                    }
                    break;
              }
        } else if (width >= 2500  && pos >= 8) {
            return 1;
        } else {
            return -1;
        }
        return 0;
    }
};

OregonDecoderV2 orscV2;

volatile word pulse;

void ext_int_1(void)
{
    static word last;
    // determine the pulse length in microseconds, for either polarity
    pulse = micros() - last;
    last += pulse;
}

void reportSerial (const char* s, class DecodeOOK& decoder) {
    byte pos;
    const byte* data = decoder.getData(pos);
    Serial.print(s);
    Serial.print(' ');
    for (byte i = 0; i < pos; ++i)
    {
        Serial.print(data[i] >> 4, HEX);
        Serial.print(data[i] & 0x0F, HEX);
    }

    Serial.println();

    decoder.resetDecoder();
}

void setup ()
{
    Serial.begin(115200);
    Serial.println("\n[ookDecoder]");
    attachInterrupt(1, ext_int_1, CHANGE);

    //DDRE  &= ~_BV(PE5); //input with pull-up 
    //PORTE &= ~_BV(PE5);
}

void loop () {
    static int i = 0;
    cli();
    word p = pulse;

    pulse = 0;
    sei();

    if (p != 0)
    {
        if (orscV2.nextPulse(p))
            reportSerial("OSV2", orscV2);  
    }
}